Two way MURS base station radio.

The M538-BS is a base station MURS transceiver that will receive alert signals from the MURS Alert™ transmitter and also can be used for two way voice communications between other MURS transceivers. The BS has 5 channels and 38 sub channels to help you communicate with other users. The M538-BS is powered by a plug-in transformer. The BS is capable of communicating over distances of several miles*. The FCC also allows you to use MURS without a license. Although other radio services require a license, MURS is license free.

When an alert signal is received from the MURS Alert™ transmitter the BS will sound off with the voice of the alert signal and will also display an alert icon as a visual display that an alert signal has been received. Also, the M538-BS is equipped with a normally open (N/O) relay output. The relay can be used to connect the base station to other existing systems such as alarm panels or even doorbells. This has many different applications for small businesses, farmers, security guards, outdoorsmen. Anyone who needs to have real time monitoring and two way voice communications will benefit from MURS. The base station can also be used to communicate with the M538-HT hand held radio. This allows someone in the house or shop to be in direct contact with someone out and about in the field. This allows a parent to keep track of the kids or a supervisor to stay in touch with the employees.

The BS kit consists of one MURS Alert™ transmitter and one M538-BS base station transceiver. The BS kit is ideal for use in fixed locations such as homes, shops or offices.

Copyright © 2003 Dakota Alert. All rights reserved.

At Dakota Alert, we have been distributing and manufacturing driveway alarms for over 20 years. We have the experience necessary to meet your needs. Our product lines include Wireless Motion Drive Alerts, Wireless Rubber hose drive alerts, Vehicle Sensors, Weather Alert products and much more. Wireless Motion Alerts are very popular units because they are easy to install and will detect both vehicles and people walking. The radio operated drive alert consists of 2 parts - a transmitter and a receiver with 1 whistle. The receiver can be located in your house and plugged into a standard wall outlet. The weatherproof outside transmitter, operated by a 9 volt battery that normally lasts 6 months to 1 year, should be located in the area of your driveway. The transmitter sends out an invisible beam approximately 80 feet. The beam may be pointed in any direction since there is no reflector needed at the end of the beam. If a vehicle or person enters this area, the transmitter, which detects motion will send a radio signal up to 1000’* back to the receiver in the house. This sounds a small whistle for approximately 3 seconds to alert you and then shuts off automatically. In the event that you do not want the whistle to sound at any particular time, the receiver is equiped with an on-off switch.